How to Fix Driver Power State Failure Error

555

Fix Driver Power State Failure – The Driver Power State Failure error mostly occur due to a corrupted or outdated driver for any hardware device that your system may have. This Driver Power State Failure Error happens because of old or corrupted drivers. Updating the driver is most likely to solve the problem. Sometimes you may need to get rid of the corrupt driver using the safe boot option and do a fresh installation.

Below we Have Mentioned Many steps to resolve Driver Power State Failure Error. Previously we have already posted how to Fix Windows Modules Installer Worker High CPU Usage Issue and How to Fix Steam disk write error and How to Fix Ethernet doesn’t have a valid IP Configuration error as well as How to Fix Nvidia Control Panel Missing Problem.

As Your computer usually sends the signal to your driver/device to wake up and solve this situation. The Driver Power State Failure Error is shown when the device/driver doesn’t respond/wake up from the signal that your computer sent. Here’s How to Fix Discord Push to Talk Not Working Error

How to Fix Driver Power State Failure

The “DRIVER POWER STATE FAILURE” issue on Windows 10 is commonly caused by an invalid device driver. In some cases after restarting the computer the “Driver Power State” problem is disappeared because Windows automatically installs the correct device drivers. The Driver Power State Failure looks like below Picture.

In other cases the “Driver Power State Failure” BSOD issue cannot be solved automatically by Windows and you have to resolve it manually, by updating the driver for the problematic device, by uninstalling a software (e.g. the Antivirus program) that can cause the issue or by changing the power settings in Network devices (e.g. Wireless, Bluetooth, etc.) to avoid sleep when unused. Here’s How to Fix the file is too large for the destination file system Error

What is DRIVER_POWER_STATE_FAILURE?

This particular Blue Screen, DRIVER_POWER_STATE_FAILURE (also known as 0x0000009F), is (usually) encountered due to driver errors encountered when, say, you put your computer to sleep or take it out of sleep. Drivers are instructions given by your device to tell your computer how to interact with them — your keyboard’s driver is what registers the keys you tap as letters to appear on your screen. Drivers are for peripherals and nearly every part of your computer. Here’s How to Fix Nvidia Control Panel Missing Problem

Driver Power State Failure errors are usually caused by a computer or device driver going into sleep mode while you’re still using the device. Windows would send a wake signal to the device once it is needed and if the device doesn’t respond in time or at all, Windows flags a Driver Power State Failure error. The error can be caused either by the driver itself or power settings. Here’s How to Fix Kmode Exception not Handled Error

Steps to Fix Driver Power State Failure

The Driver Power State Failure error can usually be fixed with a simple restart. However, in case, the restart couldn’t fix the driver power state failure error you may need to try alternate fixes. So follow below methods to fix Driver Power State Failure Error.

1. Go into Safe Mode and then uninstall the driver

To fix Driver Power State Failure error go into Safe Mode and then uninstall the driver or drivers that are causing the problem. To go into Safe Mode from the sign in screen, follow these simple steps:

  1. Grab your Windows 10 computer.
  2. Restart your Windows 10 computer.
  3. Then, press the Shift key and hold it down.
  4. Next, choose the Power option and restart your computer.
  5. Once your Windows 10 restart, press either the 4 key or F4. This will select the start your Windows 10 PC in Safe Mode. You could also press either the 5 key or F5, which will then go to Safe Mode with Networking.

Once you have booted your Windows 10 computer in Safe Mode follow one of the sets of steps above, follow these simple steps to uninstall the problematic drivers:

  1. Hit the following two keys at the same time: The Windows key and the R key. This action will prompt a Run dialog to appear on your screen.
  2. Then, type the following command into the run box: “msconfig” [no quotation marks].
  3. Once you have typed the command in, click on the OK button. This action will prompt the System configuration window to display on the screen.
  4. The System configuration has several tabs. Click on the Boot tab.
  5. Check the Safe boot box.
  6. Click on the Ok button.
  7. Finally, click on Restart.

Once your computer has restarted, you will be in a position to uninstall the problematic drivers in total safety:

  1. Hit the following two keys at the same time: The Windows key and the R key. This action will prompt a Run dialog to appear on your screen.
  2. Then, type the following command into the run box: “devmgmt.msc” [no quotation marks].
  3. Once you have typed the command in, click on the OK button. This action will prompt the System configuration window to display on the screen.
  4. Next, you will need to expand the category and search for any devices (drivers) that have a yellow sign displaying next to them. This is how you will identify the driver or drivers causing the error.
  5. Then, you will need to remove each of the problematic errors one by one by right clicking on each of them and selecting uninstall.

Once you have safely removed each and every one of the problematic drivers, you will need to restart your Windows 10 computer. If you did check the Safe boot box when you restarted your computer before, make sure that you uncheck it before restarting your PC this final time.


2. Uninstall Driver which is Causing Issue

Many a times Uninstalling the Driver which is causing the issue fixes Driver Power State Failure Error.  Go to Device Manager to check for the driver status. Uninstalling the faulty driver might fix the error. Follow these steps to uninstall the driver. 

1) Press Win+R (Windows logo key and R key) at the same time to invoke the run command.

2) Type devmgmt.msc in the run box and click OK. Then Device Manager will open.

3) In Device Manager, locate the faulty driver. If the driver is having problem, you’ll see a yellow mark next to the device name. Then right-click on the device name (For example, uninstall graphics card driver.) and select Uninstall.

4) Now Click on Uninstall and your driver will be uninstalled

5) Now Restart your PC and see if this fix for Driver Power State Failure Error is resolved or not.


3. Update the System Drivers

If Uninstalling the drivers does not work then try to update your Drivers. You can Manually Update your Driver or There are Many Softwares to do the Same. If you have less drivers in your PC then you can Update them Manually to Fix Driver Power State Failure Error.


4.  Do a System Restore

You can restore your windows to previously working Time. Every system generates a system restore Points so if your System Protection is turned on, Windows will create a restore point before you install the driver. Then you can follow these steps to restore the driver to earlier version to fix this issue.

1) Press Win+R (Windows logo key and R key) at the same time to invoke a run box.

2) Type rstrui.exe and click OK. The System Restore Window will open.

3) Click Next then you may see the following screen. Select a restore point that was created before the error occurred. Click Next to continue and follow the on-screen instructions to finish the restore.

  1. Reboot your PC and check to see if the problem Driver Power State Failure Error resolved.

5. Run System File Check (SFC)

1.In the safe mode, Right click on Start and select Command Prompt(Admin) to open cmd.

2.Type the following command in cmd: /scannow

3.Let system file check run, usually, it takes 5 to 15 minutes.
Note: Sometimes you have to run SFC command 3-4 times to fix the problem.

4.After the process is finished and you receive the following message:

  • Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the
    CBS.Log %WinDir%\Logs\CBS\CBS.log.

5.Simply restart your PC and see if the problem is resolved or not.

6.If you receive the following message:

  • Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the
    CBS.Log %WinDir%\Logs\CBS\CBS.log.

7.Then you have to manually repair corrupted files, to do this first view details of the SFC process.

8.At the command prompt, type the following command, and then press ENTER:

  • findstr /c:”[SR]” %windir%\Logs\CBS\CBS.log >”%userprofile%\Desktop\sfcdetails.txt”

9.Open the Sfcdetails.txt file from your desktop.

10.The Sfcdetails.txt file uses the following format: Date/Time SFC detail

11.The following sample log file contains an entry for a file that could not be repaired

  • 2014-02-17 02:40:22, CSI 000001aa [SR] Cannot repair member file [l:22{11}]”autochk.exe” of Microsoft-Windows-Autochk, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

12.Now type the following command in the cmd:

  • DISM.exe /Online /Cleanup-image /Scanhealth && DISM.exe /Online /Cleanup-image /Restorehealth

This will run DSIM(Deployment Image Servicing and Management) restore commands and will fix SFC errors.

13.After running DISM it is a good idea to re-run SFC /scannow to make sure all the issues were fixed.

14.Restart your PC and check for the Driver Power State Failure Error


6. Performing BIOS update

If on a laptop, find the name of your laptop and the appropriate BIOS update for it. If on a desktop, find your model or look at the packaging of your motherboard to determine where you can find the manufacturer’s website and upgrade your BIOS.

Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, an expert supervision is recommended.

1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.

2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.

3.Go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.

4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.

Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

5.Once the file is downloaded, just double click on the Exe file to run it.

6.Finally, you have updated your BIOS and this may resolve the Driver Power State Failure Error also.

SO these are the some methods to fix Driver Power State Failure Error, if you are facing any issue in any of the above methods do comment below and we will try to resolve your Driver Power State Failure Error

 

Join Our TeleGram Channel - Join Here

Like TricksBySTG Facebook Page - Like Here

Join Tricks By STG Facebook Group - Click here to Join

Subscribe to TricksBySTG Youtube Channel - Subscribe Now

Join Best CryptoCurrency Related Facebook Group - Click here to Join

Subscribe to our Push Notification to get instant Notification of all Offers & Tricks



3 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here